Datasheet4U Logo Datasheet4U.com

S-34TS04A - 2-WIRE SERIAL E2PROM

General Description

Select address input Select address input Select address input Ground Serial data I/O Serial clock input Temperature event output Power supply

1.

Do not use it in "High-Z".

Remark For DFN-8(2030)B package, connect the heatsink of back side to the board, and set electric potential open or VSS.

Key Features

  • Package E2PROM block.
  • Page write: 16 bytes / page.
  • Sequential read.
  • Write protect function during low power supply voltage.
  • Write protect: Individual software data protection for each of four 128-byte blocks.
  • Endurance: 106 cycle / word.
  • 1 (Ta = +25°C).
  • Data retention: 100 years (Ta = +25°C).
  • Memory capacity: 4 K-bit.
  • Initial delivery state: FFh.
  • DFN-8(2030)B 5 84 1 (3.0 × 2.0 × t0.8 mm) Te.

📥 Download Datasheet

Datasheet Details

Part number S-34TS04A
Manufacturer ABLIC
File Size 468.51 KB
Description 2-WIRE SERIAL E2PROM
Datasheet download datasheet S-34TS04A Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S-34TS04A www.ablic.com © ABLIC Inc., 2013-2019 2-WIRE SERIAL E2PROM WITH TEMPERATURE SENSOR FOR DIMM SERIAL PRESENCE DETECT Rev.2.0_00_U This IC is a 2-wire serial E2PROM with temperature sensor for DIMM serial presence detect which operates in 2.2 V to 3.6 V voltage ranges. This IC has the capacity of 4 K-bit and the organization of 2 pages × 256-word × 8-bit. Page write and sequential read are available. This IC operates with the I2C-bus at 1.0 MHz maximum. A substantial reduction in current consumption may be achieved by using the software programmed shutdown mode which can be set by the I2C-bus. Caution This product is intended to use in general electronic devices such as consumer electronics, office equipment, and communications devices.