Power supply voltage pin Connection pin of battery for charging Thermistor connection pin Output pin for status display Connection pin of capacitor for charge timer setting WAKEUP input pin GND pin FET gate drive pin for resonance
4
WIRELESS POWER RECEIVER CONTROL IC WITH CHARGE FUNCTION
Rev.2.1_
Key Features
Power supply voltage:
VDD = 2.2 V to 5.0 V.
Current consumption during charge operation:
ISS1 = 250 μA typ.
VBAT pin current consumption during power-down:
IPDN = 1.0 μA max.
UVLO detection voltage:
VUVLO.
= 2.0 V typ.
Charge function to a small lithium-ion rechargeable battery
Charge current:
ILIM = 33 mA typ. Precharge current:
IPRE = 3.3 mA typ. Precharge completion voltage:
2.4 V to 3.4 V (50 mV step)
Charge completion.
Full PDF Text Transcription for S-8473 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
S-8473. For precise diagrams, and layout, please refer to the original PDF.
UNCTION Rev.2.1_00 The S-8473 Series is Wireless Power Receiver Control IC, which is configured with an overvoltage detection circuit, a charge current control circuit, a VBAT voltage detection circuit, a UVLO circuit, high temperature / low temperature detection circuit, etc. This IC has a charge function to a small lithium-ion rechargeable battery. Features • Power supply voltage: VDD = 2.2 V to 5.0 V • Current consumption during charge operation: ISS1 = 250 μA typ. • VBAT pin current consumption during power-down: IPDN = 1.0 μA max. • UVLO detection voltage: VUVLO− = 2.0 V typ. • Charge function to a small lithium-ion