AP1040
Overview
The AP1040 is a 2ch H-Bridge motor driver that supports a maximum output current of 2.0A and from 8 to 32V operation voltage. The control mode of the AP1040 can be switched between parallel input mode and complemental input mode by the SEL pin.
- Motor Drive Voltage : 8V~32V (Single Power Supply)
- Control Power Supply : Not Necessary
- Maximum Output Current (DC) : 1.2A @Ta=25°C
- Maximum Output Current (Peak) : 2.0A @Ta=25°C, t<10ms
- ON Resistance of H-Bridge : 0.7Ω (High+Low) @Ta=25°C
- Input Interface : Parallel Input or Complemental Input
- PWM Pulse : Maximum 200kHz
- Protection Function : Over Heat Detection, Overcurrent Detection, Low Voltage Detection and Through Current Protection Functions
- Output Pin for Error Detection Flags
- Overcurrent Detection Time Adjustment Pin
