AT17F080A Datasheet | Atmel

AT17F040A and AT17F080A FPGA Configuration Flash Memory Features - Programmable 4,194,304 x 1 and 8,388,608 x 1-bit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays (FPGAs) - 3.3V Output Capability - 5.0V Tolerant I/O Pins - Program Support using the Atmel ATDH2200E System, ATDH2225 ISP cable, or Third-party Programmers - In-System Programmable (ISP) via 2-wire Bus - Simple Interface to SRAM FPGAs - patible with Atmel AT40K and AT94K Devices, Altera® FLEX®, Excalibur™, Stratix®, Cyclone™, and APEX™ Devices - Cascadable Read-back to Support Additional Configurations or Higher-density Arrays - Low-power CMOS FLASH Process - Available in 8-pad LAP and 20-lead PLCC Packages - Emulation of the Atmel AT24C Serial EEPROMs - Low-power Standby Mode - Single Device Capable of Holding 4-Bitstream Files Allowing Simple System Reconfiguration - Fast Serial Download Speeds up to 33MHz - Endurance: 100,000 Write Cycles Typical - Green (Lead/Halide-free/ROHS pliant) Package Options Description The Atmel® AT17Fxxx A Series of In-System Programmable Configuration PROMs (Configurators) provide an easy-to-use, cost-effective configuration memory solution for FPGAs. The AT17Fxxx A Series devices are packaged in the 8-pad LAP and 20-lead PLCC (Table 1-1). The AT17Fxxx A Series Configurators use a simple serial-access procedure to configure one or more FPGA devices. The AT17Fxxx A Series Configurators can be programmed with industry-standard programmers, the Atmel ATDH2200E Programming Kit or the Atmel ATDH2225 ISP Cable. Table 1. AT17Fxxx A Series Packages Package AT17F040A 8-pad...