AT17F16 Datasheet | Atmel

FPGA Configuration Flash Memory Features - Programmable 16,777,216 x 1-bit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays (FPGAs) - 3.3V Output Capability - 5.0V Tolerant I/O Pins - Program Support using the Atmel ATDH2200E System, ATDH2225 ISP Cable, or Third-party Programmers - In-System Programmable (ISP) via 2-wire Bus - Simple Interface to SRAM FPGAs - patible with Atmel AT40K and AT94K Devices, Altera® FLEX®, APEX™ Devices, Lucent® ORCA® FPGAs, Xilinx® XC3000, XC4000, XC5200, Spartan®, Virtex® FPGAs, Motorola® MPA1000 FPGAs - Cascadable Read-back to Support Additional Configurations or Higher-density Arrays - Low-power CMOS FLASH Process - Available in 8-pad LAP (Pin-patible with 8-lead SOIC/VOIC Footprint Packages) and 20-lead PLCC Packages - Emulation of the Atmel AT24C Serial EEPROMs - Low-power Standby Mode - Single Device Capable of Holding Four Bitstream Files Allowing Simple System Reconfiguration - Fast Serial Download Speeds up to 33MHz - Endurance: 10,000 Write Cycles Typical - Green (Pb/Halide-free/Ro HS pliant) Packages Description The Atmel® AT17F16 In-System Programmable Configuration PROMs (Configurators) provide an easy-to-use, cost-effective configuration memory solutions for FPGAs. The AT17F16 is packaged in the 8-pad LAP and 20-lead PLCC packages (Table 1). The AT17F16 uses a simple serial-access procedure to configure one or more FPGA devices. The AT17F16 can be programmed with industry-standard programmers, the Atmel ATDH2200E Programming Kit, or the Atmel ATDH2225 ISP Cable. Table 1. AT17F16 Packages Package 8-pad LAP Yes 20-lead PLCC Yes Atmel-3392G-CNFG-AT17F16-Datasheet_012015 1. Pin...