AT91SAM9260 Overview
The Atmel® | SMART SAM9260 eMPU is based on the integration of an ARM926EJ-S™ processor with fast ROM and RAM memories and a wide range of peripherals. The SAM9260 embeds an Ethernet MAC, one USB Device Port, and a USB Host controller. It also integrates several standard peripherals, such as the USART, SPI, TWI, Timer Counters, Synchronous Serial Controller, ADC and MultiMedia Card Interface.
AT91SAM9260 Key Features
- 180 MHz ARM926EJ-S™ ARM® Thumb® Processor ̶ 8 Kbytes Data Cache, 8 Kbytes Instruction Cache, MMU
- Memories ̶ 32-bit External Bus Interface supporting 4-bank SDRAM/LPSDR, Static Memories, pactFlash, SLC NAND Flash with
- Peripherals ̶ ITU-R BT. 601/656 Image Sensor Interface (ISI) ̶ USB Device and USB Host with dedicated On-Chip Transceive
- System ̶ 90 MHz six 32-bit layer AHB Bus Matrix ̶ 22 Peripheral DMA Channels ̶ Boot from NAND Flash, DataFlash or serial
- I/O ̶ Three 32-bit Parallel Input/Output Controllers ̶ 96 Programmable I/O Lines Multiplexed with up to Two Peripheral I
- Package ̶ 217-ball LFBGA
- 15 x 15 x 1.4 mm, 0.8 mm pitch ̶ 208-pin PQFP
- 28 x 28 x 4.1 mm, 0.5 mm pitch