Datasheet4U Logo Datasheet4U.com

AT49F020 - 2-Megabit 5-volt Only Flash Memory

General Description

The AT49F020 is a 5-volt only in-system Flash Memory.

Its 2 megabits of memory is organized as 262,144 words by 8 bits.

Key Features

  • Single Voltage Operation.
  • 5V Read.
  • 5V Reprogramming.
  • Fast Read Access Time - 90 ns.
  • Internal Program Control and Timer.
  • 8K Bytes Boot Block With Lockout.
  • Fast Erase Cycle Time - 10 seconds.
  • Byte-By-Byte Programming - 50 µs/Byte.
  • Hardware Data Protection.
  • DATA Polling For End Of Program Detection.
  • Low Power Dissipation.
  • 50 mA Active Current.
  • 100 µA CMOS Standby Current.
  • T.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Features • Single Voltage Operation – 5V Read – 5V Reprogramming • Fast Read Access Time - 90 ns • Internal Program Control and Timer • 8K Bytes Boot Block With Lockout • Fast Erase Cycle Time - 10 seconds • Byte-By-Byte Programming - 50 µs/Byte • Hardware Data Protection • DATA Polling For End Of Program Detection • Low Power Dissipation – 50 mA Active Current – 100 µA CMOS Standby Current • Typical 10,000 Write Cycles Description The AT49F020 is a 5-volt only in-system Flash Memory. Its 2 megabits of memory is organized as 262,144 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 90 ns with power dissipation of just 275 mW over the commercial temperature range.