Datasheet4U Logo Datasheet4U.com

AT90USB162 - 8-bit Microcontroller

Description

Digital supply voltage.

Ground.

Port B (PB7..PB0) Port B is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit).

Features

  • High Performance, Low Power AVR® 8-Bit Microcontroller.
  • Advanced RISC Architecture.
  • 125 Powerful Instructions.
  • Most Single Clock Cycle Execution.
  • 32 x 8 General Purpose Working Registers.
  • Fully Static Operation.
  • Up to 16 MIPS Throughput at 16 MHz.
  • Non-volatile Program and Data Memories.
  • 8K / 16K Bytes of In-System Self-Programmable Flash.
  • Endurance: 10,000 Write/Erase Cycles.
  • Optional Boot Code Se.

📥 Download Datasheet

📁 Similar Datasheet

  • AT90-0001 - Digital Attenuator/ 31.0 dB/ 5-Bit/ TTL Driver/ DC-6.0 GHz (Tyco Electronics)
  • AT90-0106 - Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC-2.4 GHz (Tyco Electronics)
  • AT90-0107 - Digital Attenuator/ 31.5 dB/ 6-Bit/ TTL Driver/ DC-4.0 GHz (Tyco Electronics)
  • AT90-0233 - Digital Attenuator/ 30 dB/ 4-Bit/ TTL Driver/ DC - 2.5 GHz (Tyco Electronics)
  • AT90-0263 - Digital Attenuator/ 31 dB/ 5-Bit/ TTL Driver/ DC-4.0 GHz (Tyco Electronics)
  • AT90-0283 - Digital Attenuator/ 15.5 dB/ 5-Bit/ TTL Driver/ DC-3.5 GHz (Tyco Electronics)
  • AT90-0413 - Digital Attenuator/ 15 dB/ 4-Bit/ TTL Driver/ DC - 4.0 GHz (Tyco Electronics)
  • AT90-1106 - Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC-2.4 GHz (Tyco Electronics)
  • AT90-1107 - Digital Attenuator/ 31.5 dB/ 6-Bit/ TTL Driver/ DC-4.0 GHz (Tyco Electronics)
  • AT90-1233 - Digital Attenuator/ 30 dB/ 4-Bit/ TTL Driver/ DC - 2.5 GHz (Tyco Electronics)
Other Datasheets by ATMEL

Full PDF Text Transcription

Click to expand full text
Features • High Performance, Low Power AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 125 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz • Non-volatile Program and Data Memories – 8K / 16K Bytes of In-System Self-Programmable Flash • Endurance: 10,000 Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits • USB boot-loader programmed by default in the factory • In-System Programming by on-chip Boot Program hardware-activated after reset • True Read-While-Write Operation – 512 Bytes EEPROM • Endurance: 100,000 Write/Erase Cycles – 512 Bytes Internal SRAM – Programming Lock for Software Security • USB 2.
Published: |