Datasheet4U Logo Datasheet4U.com

S6510 - SIMPLE BALLAST CONTROLLER

Description

The device provides simple and performance electronics ballast control function for the half bridge L/C resonant inverter.

This device is optimized for electronics ballast requiring a minimum board area, reduced component count and low power dissipation.

Features

  • No lamp protection Low Start up & Operating Current Internal Soft Start Flexible Soft Start Frequency Trimmed 1.5% internal Reference Under Voltage Lock Out with Hysteresis High Current Totem Pole Gate Drive Ordering Information Type NO. S6510 Marking S6510 Package Code SOP-8 Outline Dimensions unit : mm PIN Collection KSI-8012-001 1 Internal Block Diagram 2.5V Ref S6510 Under Voltage Lock Out Vcc ErrorAmplifier INV 0.

📥 Download Datasheet

Datasheet preview – S6510

Datasheet Details

Part number S6510
Manufacturer AUK corp
File Size 316.29 KB
Description SIMPLE BALLAST CONTROLLER
Datasheet download datasheet S6510 Datasheet
Additional preview pages of the S6510 datasheet.

📁 Similar Datasheet

  • S6510MG - Infrared Laser Diode (Roithner)
  • S6515 - POSITION SENSITIVE DETECTOR (ETC)
  • S6503 - Power Factor Collector (KODENSHI)
  • S6503P - Power Factor Collector (KODENSHI)
  • S6505MG - Infrared Laser Diode (Roithner)
  • S650DK3-KD2 - TFT LCD Module (INNOLUX)
  • S650HJ2-LS5 - LCD Module (INNOLUX)
  • S6530MG - Red Laser Diode (Roithner)
  • S6551 - ASYNCHRONOUS COMMUNICATION INTERFACE ADAPTER (ETC)
  • S6551A - ASYNCHRONOUS COMMUNICATION INTERFACE ADAPTER (ETC)
Other Datasheets by AUK corp
  • S6510P - SIMPLE BALLAST CONTROLLER
  • S6500 - POWER FACTOR CORRECTOR
  • S6500P - POWER FACTOR CORRECTION

Full PDF Text Transcription

Click to expand full text
F Semiconductor S6510 SIMPLE BALLAST CONTROLLER Description The device provides simple and performance electronics ballast control function for the half bridge L/C resonant inverter. This device is optimized for electronics ballast requiring a minimum board area, reduced component count and low power dissipation. Internal soft start circuitry eliminates the need for an external soft start PTC resistor. The initial soft start frequency and soft start time can be easily adjusted depending on the types of lamp. Prevent burning out of switches in no lamp condition. Internal 18V regulator clamps Vcc line of supply voltage for eliminating an external zener diode.
Published: |