HFBR-7934EHZ Datasheet | AVAGO TECHNOLOGIES

Description The HFBR-7934Z transceiver is a high performance fiber optic module for parallel optical data munication applications. It incorporates 8 independent data channels (4 for transmit and 4 for receive) operating from 1 to 3.125 Gb/s 8B/10B encoded per channel providing a cost effective solution for very short reach applications requiring 12.5 Gb/s aggregate bandwidth. The module is designed to operate on multimode fiber systems at a nominal wavelength of 850 nm. It incorporates high performance, highly reliable, short wavelength optical devices coupled with proven circuit technology to provide long life and consistent service. The HFBR-7934Z transceiver module incorporates a 4 channel VCSEL (Vertical Cavity Surface Emitting Laser) array together with a custom 4 channel laser driver integrated circuit providing IEC-825 and CDRH Class 1M laser eye safety. It also contains a 4 channel PIN photodiode array coupled with a custom preamplifier / post amplifier integrated circuit. Operating on 3.3 V power supply this module provides LVTTL/LVCMOS control interfaces and CML patible high speed data lines which simplify external circuitry. The transceiver is housed in MTP®/MPO receptacled package with integral finned heatsink. Electrical connections to the device are achieved by means of a pluggable 10x10 connector array. Features - Ro HS pliant - Four Transmit and Four Receive Channels; 1 to 3.125 Gb/s 8B/10B encoded per channel - patible with SONET scrambled and 8B10B encoded data formats - 850 nm VCSEL array source - Conforms to “POP4” Four-Channel Pluggable Optical Transceiver Multisource Agreement - 50/125 µm multimode fiber operation - Distance up to 150 m with 500 MHz.km fiber at 3.125 Gb/s - Distance up to 350 m with 2000 MHz.km fiber at 3.125 Gb/s - Pluggable package - Outputs (Tx & Rx) are squelched for loss of signal - Control I/O is patible with LVTTL and LVCMOS - Standard MTP® MPO ribbon fiber connector interface - Integrated heat sink - Manufactured in an...