ADNS-6010 Datasheet | Avago Technologies

ADNS-6010 Laser Mouse Sensor Data Sheet Description The Avago Technologies ADNS-6010 sensor along with the ADNS-6120 or ADNS-6130-001 lens, ADNS-6230001 clip and ADNV-6340 laser diode form a plete and pact laser mouse tracking system. It is the world’s first laser-illuminated systems enabled for high performance navigation. Driven by Avago Technologies Laser Stream, it can operate on many surface that prove difficult or traditional LED-based optical navigation. It’s high-performance architecture is capable of sensing high-speed mouse motion -with resolution up to 2000 counts per inch, velocities up to 45 inches per second (ips) and accelerations up to 20g. This sensor is powered for the extremely high sensitive user There are no moving parts, in the plete assembly for ADNS-6010 laser mouse system, thus it is high reliability and less maintenance for the end user. In addition, precision optical alignment is not required, facilitating high volume assembly. Features x High speed motion detection - up to 45 ips and 20g x New Laser Stream architecture for greatly improved optical navigation technology x Programmable frame rate over 7080 frames per second x Smart Speed self-adjusting frame rate for optimum performance x Serial port burst mode for fast data transfer x 400, 800, 1600 or 2000 cpi selectable resolution x Single 3.3 volt power supply x Four-wire serial port along with Power Down, and Reset pins x Laser fault detect circuitry on-chip for Eye Safety pliance Applications x Mice for game consoles and puter games x Mice for desktop PC’s, Workstations, and portable PC’s x Laser Trackballs x Integrated input devices Theory of Operation The ADNS-6010 is based on Laser Stream Technology, which measures changes in position by optically acquiring sequential images (frames) and mathematically determining the direction and magnitude of movement. ADNS-6010 contains an Image Acquisition System (IAS), a Digital Signal Processor (DSP), and a four wire serial...