ADNS-6130-001 Datasheet | Avago Technologies

ADNS-6130-001 Laser Mouse Trim Lens Data Sheet Description The ADNS-6130-001 laser mouse lens are designed for use with Avago Technologies laser mouse sensors and the illumination subsystem provided by the ADNS-6230001 VCSEL assembly clip and the ADNV-6330 or ADNV6340 Single-Mode Vertical-Cavity Surface Emitting Lasers (VCSEL). Together with the VCSEL, the ADNS-6120 or ADNS-6130-001 laser mouse lens provides the directed illumination and optical imaging necessary for proper operation of the laser mouse sensor. ADNS-6130-001 laser mouse lens is a precision molded optical ponent and should be handled with care to avoid scratching of the optical surfaces. Max +0.2mm protrusion is allowed at the molding gate of either 1 side of lens. Figure 1. ADNS-6130-001 laser mouse trim lens outline drawings and details MOUSE SENSOR LID A OBJECT SURFACE Figure 2. Optical system assembly cross-section diagram B Figure 3. Logo location Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram Parameters Symbol Min. Typical Max. Distance from Object Surface to Lens Reference Plane 2.18 2.40 Distance from Mouse Sensor Lid Surface to Object Surface Units mm mm Conditions ADNS-6130-001 Sensor lid must be in contact with lens housing surface Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Parameters Design Wavelength Symbol l Min. Typical Max. 842 Lens Material- Index of Refraction N 1.5693 1.5713 1.5735 Units nm Conditions l = 842...