AMMC-6241 Datasheet | Avago Technologies

Description Avago Technologies AMMC-6241 is a high gain, low-noise amplifier that operates from 26 GHz to 43 GHz. This LNA provides a wide-band solution for system design since it covers several bands, thus, reduces part inventory. The device has input / output match to 50 Ohm, is unconditionally stable and can be used as either primary or sub-sequential low noise gain stage. By eliminating the plex tuning and assembly processes typically required by hybrid (discrete-FET) amplifiers, the AMMC6241 is a cost-effective alternative in the 26 - 43 GHz munications receivers. The backside of the chip is both RF and DC ground. This helps simplify the assembly process and reduces assembly related performance variations and costs. It is fabricated in a PHEMT process to provide exceptional noise and gain performance. For improved reliability and moisture protection, the die is passivated at the active areas. AMMC-6241 Absolute Maximum Ratings [1] Symbol Parameters/Conditions Vd Positive Drain Voltage Units Min. Max. Vg Gate Supply Voltage Id Drain Current m A Pin CW Input Power d Bm Tch Operating Channel Temp. °C +150 Tstg Storage Case Temp. °C -65 +150 Tmax Maximum Assembly °C Temp (60 sec max) +300 Features - Wide frequency range: 26 - 43 GHz - High gain: 20 d B - Low 50 Ω Noise Figure: 2.7 d B - 50 Ω Input and Output Match - Flat Gain Response - Single 3V Supply Bias Applications - Microwave Radio systems - Satellite VSAT, DBS Up/Down...