Datasheet4U Logo Datasheet4U.com

AMMC-6431 - 25-33 GHz 0.7W Power Amplifier MMIC

General Description

The AMMC-6431 is an MMIC power amplifier designed for use in wireless transmitters that operate within a 25GHz and 33GHz range.

At 32GHz, it provides 28.5dBm of output power (1) and 19.5dB of small-signal gain from a small easyto-use device.

Key Features

  • MMIC bare die.
  • 0.7 watt output power (P-1).
  • 50 Ω match on input and output Typical Performance (Vd=5V, Idsq=0.65A).
  • Frequency range 25 to 33 GHz.
  • Small signal Gain of 19dB.
  • Output power @ P-1 of 28.5dBm (Typ. ).
  • Input/Output return-loss of -15dB/-15dB.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AMMC-6430 25 - 33 GHz Power Amplifier AVAGO TECHNOLOGIES
AMMC-6430 26 - 34 GHz 1W Power Amplifier Agilent
AMMC-6420 18 GHz Power Amplifier AVAGO TECHNOLOGIES
AMMC-6425 Power Amplifier AVAGO TECHNOLOGIES
AMMC-6440 37 - 42 GHz Power Amplifier Hewlett-Packard

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
AMMC-6408 6-18 GHz 1W Power Amplifier
AMMC-6440 Power Amplifier
AMMC-6442 37 - 40 GHz 1W Power Amplifier
AMMC-6120 8-20 GHz Output x2 Active Frequency Multiplier
AMMC-6222 7 to 21 GHz GaAs High Linearity Low Noise Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AMMC-6431 25-33 GHz 0.7W Power Amplifier MMIC Data Sheet Description The AMMC-6431 is an MMIC power amplifier designed for use in wireless transmitters that operate within a 25GHz and 33GHz range. At 32GHz, it provides 28.5dBm of output power (1) and 19.5dB of small-signal gain from a small easyto-use device. This MMIC is optimized for linear operation with an output third order intercept point (OIP3) of 37dBm. The device has input and output matching circuitry for use in 50Ω environments. The AMMC-6431 also has integrated, temperature compensated RF power detection circuitry that enables power detection of 0.3V/Watt at 30GHz. Features • MMIC bare die • 0.7 watt output power (P-1) • 50 Ω match on input and output Typical Performance (Vd=5V, Idsq=0.