APDS-9300 Datasheet PDF - AVAGO Miniature Ambient Light Photo Sensor Specs

APDS-9300 - Miniature Ambient Light Photo Sensor

Datasheet Summary

Description

The APDS-9300 is a low-voltage Digital Ambient Light Photo Sensor that converts light intensity to digital signal output capable of direct I2C interface.

Each device consists of one broadband photodiode (visible plus infrared) and one infrared photodiode.

Features

Approximate the human-eye response.
Precise Illuminance measurement under diverse lighting conditions.
Programmable Interrupt Function with User-Defined Upper and Lower Threshold Settings.
16-Bit Digital Output with I2C Fast-Mode at 400 kHz.
Programmable Analog Gain and Integration Time.
Miniature ChipLED Package Height - 0.55mm Length - 2.60mm Width - 2.20mm.
50/60-Hz Lighting Ripple Rejection.
Low 2.5.

Datasheet Details

Part number	APDS-9300
Manufacturer	AVAGO
File Size	313.29 KB
Description	Miniature Ambient Light Photo Sensor
Datasheet	APDS-9300 Datasheet
Additional preview pages of the APDS-9300 datasheet.

📁 Similar Datasheet

APDS-9002 - Miniature Surface-Mount Ambient Light Photo Sensor (Agilent)

APDS-9253-001 - Digital RGB Sensor (Broadcom)

APDS-9999 - Digital Proximity and RGB Sensor (Broadcom)

APD-128G032 - Plasma Display Modules 128 x 32 Graphics Display (Vishay Siliconix)

APD-128G064 - Plasma Display (Vishay)

APD-128G064A - Plasma Display (Vishay Siliconix)

APD-192G064 - Plasma Panel Display Modules 192 x 64 Graphics Display (Vishay Siliconix)

APD-256G064-1 - Plasma Panel Display Module (Vishay)

APD-480M021 - Plasma Panel Display Modules (Vishay)

APD-480M021-1 - Plasma Panel Display Modules (Vishay)

Full PDF Text Transcription

Click to expand full text

APDS-9300 Miniature Ambient Light Photo Sensor with Digital (I2C) Output Data Sheet Description The APDS-9300 is a low-voltage Digital Ambient Light Photo Sensor that converts light intensity to digital signal output capable of direct I2C interface. Each device consists of one broadband photodiode (visible plus infrared) and one infrared photodiode. Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human-eye response.

Published: Apr 9, 2015 |