AM29F010 Datasheet | Advanced Micro Devices

feature that disables/reenables program and erase operations in any bination of sectors - Sector protection/unprotection can be implemented using standard PROM programming equipment s Embedded Algorithms - Embedded Erase algorithm automatically pre-programs and erases the chip or any bination of designated sector - Embedded Program algorithm automatically programs and verifies data at specified address s Minimum 100,000 program/erase cycles guaranteed s Package options - 32-pin PLCC - 32-pin TSOP - 32-pin PDIP s patible with JEDEC standards - Pinout and software patible with single-power-supply flash - Superior inadvertent write protection s Data# Polling and Toggle Bits - Provides a software method of detecting program or erase cycle pletion Publication# 16736 Rev: G Amendment/+2 Issue Date: March 1998 GENERAL DESCRIPTION The Am29F010 is a 1 Mbit, 5.0 Volt-only Flash memory organized as 131,072 bytes. The Am29F010 is offered in 32-pin PLCC, TSOP, and PDIP packages. The bytewide data appears on DQ0-DQ7. The device is designed to be programmed in-system with the standard system 5.0 Volt VCC supply. A 12.0 volt VPP is not required for program or erase operations. The device can also be programmed or erased in standard EPROM programmers. The standard device offers access times of 45, 55, 70, 90, and 120 ns, allowing high-speed microprocessors to operate without wait states. To eliminate bus contention the device has separate chip enable (CE#), write enable (WE#) and output enable (OE) controls. The device requires only a single 5.0 volt power supply for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. The device is entirely mand set patible with the JEDEC single-power-supply Flash standard. mands are written to the mand register using standard microprocessor write timings. Register contents serve as input to an internal state machine that controls the erase and programming circuitry. Write...