AMMC-6220 Datasheet | Agilent Technologies

Description Agilent’s AMMC-6220 is a high gain, low-noise amplifier that operates from 6 GHz to 20 GHz. This LNA provides a wide-band solution for system design since it covers several bands, thus, reduces part inventory. The device has input / output match to 50 Ohm, is unconditionally stable and can be used as either primary or sub-sequential low noise gain stage. By eliminating the plex tuning and assembly processes Chip Size: 1700 x 800 mm (67 x 31.5 mils) Chip Size Tolerance: ± 10mm (±0.4 mils) Chip Thickness: 100 ± 10mm (4 ± 0.4 mils) Pad Dimensions: 100 x 100 mm (4 ± 0.4 mils) typically required by hybrid (discrete-FET) amplifiers, the AMMC-6220 is a cost-effective alternative in the 6 - 20 GHz munications receivers. The backside of the chip is both RF and DC ground. This helps simplify the assembly process and reduces assembly related performance variations and costs. It is fabricated in a PHEMT process to provide exceptional noise and gain performance. Features - Wide frequency range: 6 - 20 GHz - High gain: 23 d B - Low 50 Ω Noise Figure: 2.0 d B - 50 Ω Input and Output Match - Single 3V Supply Bias Applications - Microwave Radio systems - Satellite VSAT, DBS Up/Down Link - LMDS & Pt-Pt mm W Long Haul - Broadband Wireless Access (including 802.16 and 802.20 Wi Max) - WLL and MMDS loops - mercial grade military AMMC-6220 Absolute Maximum Ratings[1] Symbol Parameters/Conditions Units Vd Positive Drain Voltage Vg Gate Supply Voltage Id Drain Current m A Pin CW Input Power d Bm Tch Operating Channel Temp. °C Tstg Storage Case Temp. °C Tmax Maximum Assembly Temp (60 sec max) °C Note: 1. Operation in excess of any one of these conditions may result in permanent damage to this device Min. -65 Max. 7 NA 100 15 +150 +150 +300 Note: These devices are ESD sensitive. The following precautions are strongly remended. Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be...