Datasheet4U Logo Datasheet4U.com

A4054A - 800mA STANDALONE LINEAR Li-ion BATTERY CHARGER

General Description

The A4054A is a complete constant current / constant voltage linear charger for single cell Lithium-Ion batteries.

No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture.

Key Features

  • include charge current monitor, under-voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage. A4054A will check the battery voltage first, it will not start charging unless the battery voltage is below the auto-rechrage threshold. The A4054A is available in SOT-25 packages.

📥 Download Datasheet

Datasheet Details

Part number A4054A
Manufacturer AiT Semiconductor
File Size 709.75 KB
Description 800mA STANDALONE LINEAR Li-ion BATTERY CHARGER
Datasheet download datasheet A4054A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A40 Acorn Valves MAZDA
A4003C 3CH Power Management IC AEROSEMI
A4011 1000 TO 4000 MHz TO-8 CASCADABLE AMPLIFIER Tyco Electronics
A4011 Cascadable Amplifier MA-COM
A4012 1.0 TO 4.0 GHz TO-8 CASCADABLE AMPLIFIER Tyco Electronics

Other Datasheets by AiT Semiconductor

Part Number Description
A4051 1A LINEAR LI-ION BATTERY CHARGER
A4053 1A LINEAR LI-ION BATTERY CHARGER
A4055 800mA STANDALONE LINEAR LI-ION BATTERY CHARGER
A4057 LINEAR LI-ION BATTERY CHARGER
A4001 ONE CELL LITHIUM-ION/POLYMER BATTERY PROTECTION

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AiT Semiconductor Inc. www.ait-ic.com A4054A 800mA STANDALONE LINEAR Li-ion BATTERY CHARGER THERMAL REGULATION DESCRIPTION The A4054A is a complete constant current / constant voltage linear charger for single cell Lithium-Ion batteries. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The A4054A automatically terminates the charge cycle when the charge current drops to 1/10 the programmed value after the final float voltage is reached.