Datasheet4U Logo Datasheet4U.com

A8290 - LED DRIVER

Datasheet Summary

Description

The LEADCHIP A8290 is a high-voltage adjustable current source with accurate temperature compensation.

Features

  • Wide operation range: from 5V to 90V(VA-B).
  • ILED can be programmed from 10mA to 20mA via changing RSENSE.
  • Power dissipation can be adjusted.
  • Easy to use, only 3 pins and very little external components are needed.
  • Can be paralleled for higher current.
  • Temperature compensated.
  • Available in TO-92 packages.

📥 Download Datasheet

Datasheet preview – A8290

Datasheet Details

Part number A8290
Manufacturer AiT Semiconductor
File Size 352.10 KB
Description LED DRIVER
Datasheet download datasheet A8290 Datasheet
Additional preview pages of the A8290 datasheet.

📁 Similar Datasheet

  • A8290 - Single LNB Supply and Control Voltage Regulator (Allegro MicroSystems)
  • A8291 - Single LNB Supply and Control Voltage Regulator (Allegro MicroSystems)
  • A8292 - Dual LNB Supply and Control Voltage Regulator (Allegro MicroSystems)
  • A8293 - Single LNB Supply and Control Voltage Regulator (Allegro MicroSystems)
  • A8296 - Single LNB Supply and Control Voltage Regulator (Allegro)
  • A8297 - Dual LNB Supply and Control Voltage Regulator (Allegro)
  • A8299 - Dual LNB Supply and Control Voltage Regulator (Allegro)
  • A82 - 20 TO 250 MHz CASCADABLE AMPLIFIER (Tyco Electronics)
  • A8205SLH - LOW-DROPOUT REGULATORS . HIGH EFFICIENCY (Allegro MicroSystems)
  • A821 - PNP Plastic Encapsulated Transistor (Secos)
Other Datasheets by AiT Semiconductor
  • A8230A - ULTRA LOW-DROPOUT CONSTANT-CURRENT WITHOUT WHITE LED BIAS
  • A8240 - LED BACKLIGHT DRIVER WLED LINEAR DRIVER FOR LI-ION BATTERY APPLICATION
  • A8280 - 8-CH LED BACKLIGHT DRIVER

Full PDF Text Transcription

Click to expand full text
AiT Semiconductor Inc. www.ait-ic.com A8290 LED DRIVER WIDE RANGE, LINEAR LED DRIVER DESCRIPTION The LEADCHIP A8290 is a high-voltage adjustable current source with accurate temperature compensation. The device is designed to provide a constant current source determined by an external sense resistor R .SENSE The current is adjustable from 10mA to 20mA with less than 10% error while input changes from 5V to 90V. With an external resistor (R1 in Figure 1) between VA and IS pin, the heat in the IC can be significantly reduced while keeping the summation of IC and R1 current to be constant. This is extremely useful in the area that power lines are not very stable. A typical application for the A8290 is to drive LEDs with a constant current varies from 1020mA.
Published: |