A1145 - Ultrasensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches

Product Overview

Allegro MicroSystems

Datasheet Details

Part number	A1145
Manufacturer	Allegro MicroSystems
File Size	307.04 KB
Description	Ultrasensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches
Datasheet	A1145 Datasheet
Additional preview pages of the A1145 datasheet.

Product details

Description

The A1145 and A1146 devices are two-wire, unipolar, Hall effect switches that are factory-programmed at end-of-line to optimize ultrasensitive magnetic switchpoint accuracy.

Features

Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress.
Factory programmed at end-of-line for optimized switchpoints.
On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator ▫ 3.5 to 24 V operation Packages: 3 pin SOT23W (suffix LH), and 3 pin SIP (suffix UA).

📁 Similar Datasheet

A1141 - Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches (Allegro)
A1142 - Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches (Allegro)
A1143 - Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches (Allegro)
A1102P - Dolby-B Type Noise Reduction System (Sony)
A1103 - Unipolar Hall-Effect Digital Switch (SEC)
A1104 - Silicon PNP Power Transistor (SavantIC)
A1105 - Silicon PNP Power Transistor (SavantIC)
A1112 - A1112 High-Power 1550 nm DFB Source Lasers (Agere Systems)

Other Datasheets by Allegro MicroSystems

A1140 - Sensitive Two-Wire Chopper-Stabilized Unipolar Hall-Effect Switches
A1146 - Ultrasensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches
A1147 - (A1147 / A1148) Low Current Ultrasensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches
A1148 - (A1147 / A1148) Low Current Ultrasensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches
A1101 - Continuous-Time Switch
A1102 - Continuous-Time Switch

Published: Apr 20, 2007 |