Datasheet4U Logo Datasheet4U.com

A6261 - Protected LED Array Driver

General Description

TheA6261 is a linear, programmable current regulator providing up to 100 mA from each of four outputs (LP and LY) to drive arrays of high brightness LEDs.

The regulated LED current from each output, accurate to 5%, is set by a single reference resistor.

Key Features

  • AEC-Q100 qualified.
  • Total LED drive current up to 400 mA (LP, LJ, and LY packages) or 300 mA (LJ).
  • Current shared equally up to 100 mA by up to 4 strings (LP and LY).
  • 6 to 50 V supply.
  • Low dropout voltage.
  • LED output short-to-ground and thermal protection.
  • Disable on open LED detection option.
  • Enable input for PWM control.
  • Current slew rate limit during PWM.
  • Current set by reference resistor.
  • Auto.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A6261 Protected LED Array Driver FEATURES AND BENEFITS • AEC-Q100 qualified • Total LED drive current up to 400 mA (LP, LJ, and LY packages) or 300 mA (LJ) • Current shared equally up to 100 mA by up to 4 strings (LP and LY) • 6 to 50 V supply • Low dropout voltage • LED output short-to-ground and thermal protection • Disable on open LED detection option • Enable input for PWM control • Current slew rate limit during PWM • Current set by reference resistor • Automotive temperature range (K, –40°C to 150°C) PACKAGES 8-pin SOICN with exposed thermal pad (suffix LJ) 10-pin MSOP with exposed thermal pad (suffix LY) 16-pin TSSOP with exposed thermal pad (suffix LP) Not to scale DESCRIPTION TheA6261 is a linear, programmable current regulator providing up to 100 mA from each of four outputs