Datasheet4U Logo Datasheet4U.com

A6262 - Automotive LED Array Driver

General Description

TheA6262 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

The regulated LED current from each output, accurate to 5%, is set by a single reference resistor.

Key Features

  • AEC-Q100 qualified.
  • Total LED drive current up to 400 mA.
  • Current shared equally up to 100 mA by 4 strings.
  • 6 to 50 V supply.
  • Low dropout voltage.
  • LED output short-to-ground and thermal protection.
  • On/off toggle switch input.
  • Enable input for PWM control.
  • Current slew rate limit during PWM.
  • Current set by reference resistor.
  • Automotive temperature range.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A6263 Protected LED Array Driver Allegro
A6265 Automotive High Current LED Controller Allegro
A6267 Automotive High Current LED Controller Allegro
A6269 Automotive LED Array Driver Allegro
A6201 250mA LOW CONSUMPTION LINEAR REGULATOR AiT Semiconductor

Other Datasheets by Allegro MicroSystems

Part Number Description
A6260 High Brightness LED Current Regulator
A6261 Protected LED Array Driver
A6264 Automotive Stop/Tail LED Array Driver
A6266 High Current LED Controller
A6268 Automotive High Current LED Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FEATURES AND BENEFITS ▪ AEC-Q100 qualified ▪ Total LED drive current up to 400 mA ▪ Current shared equally up to 100 mA by 4 strings ▪ 6 to 50 V supply ▪ Low dropout voltage ▪ LED output short-to-ground and thermal protection ▪ On/off toggle switch input ▪ Enable input for PWM control ▪ Current slew rate limit during PWM ▪ Current set by reference resistor ▪ Automotive temperature range APPLICATIONS: ▪ Dome light, map light, space lighting, mood lighting PACKAGES: 10-pin MSOP with exposed thermal pad (suffix LY) 16-pin TSSOP with exposed thermal pad (suffix LP) A6262 Automotive LED Array Driver DESCRIPTION TheA6262 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.