• Part: ASM3P18S19B
  • Description: Notebook LCD Panel EMI Reduction IC
  • Manufacturer: Alliance Semiconductor Corporation
  • Size: 232.77 KB
Download ASM3P18S19B Datasheet PDF
Alliance Semiconductor Corporation
ASM3P18S19B
ASM3P18S19B is Notebook LCD Panel EMI Reduction IC manufactured by Alliance Semiconductor Corporation.
Features - FCC approved method of EMI attenuation. - Provides up to 15d B EMI reduction. - Generates a low EMI Spread Spectrum clock and a non-spread reference clock of the input frequency. - Optimized for Frequency range from 20 to 40MHz. - Internal loop filter minimizes external ponents and board space. - Low Inherent Cycle-to-Cycle jitter. - Two spread % selections: -1.25% to -1.75%. - 3.3V Operating Voltage. - Low power CMOS design. - Supports notebook VGA and other LCD timing controller applications. - Power Down function for mobile application. - Available in mercial temperature range. - Available in 8-pin SOIC and TSSOP Packages. - Ro HS pliant allows significant system cost savings by reducing the number of circuit board layers, ferrite beads, shielding, and other passive ponents that are traditionally required to pass EMI regulations. The ASM3P18S19B modulates the output of a single PLL in order to “spread” the bandwidth of a synthesized clock, and more importantly, decreases the peak amplitudes of its harmonics. This results in significantly lower system EMI pared to the typical narrow band signal produced by oscillators and most frequency generators. Lowering EMI by increasing a signal’s bandwidth is called ‘Spread Spectrum Clock Generation’. The ASM3P18S19B uses the most efficient and optimized modulation profile approved by the FCC and is implemented in a proprietary all digital method. Applications The ASM3P18S19B is targeted towards EMI management for memory and LVDS interfaces in mobile graphic chipsets and high-speed digital applications such as PC peripheral devices, consumer electronics, and embedded controller systems. Product Description The ASM3P18S19B is a Versatile Spread Spectrum Frequency Modulator designed specifically for input clock frequencies from 20 to 40MHz. (Refer Input Frequency and Modulation Rate Table). The ASM3P18S19B reduces electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of down...