AH285 Datasheet | Anachip

Hall-Effect Smart Fan Motor Controller - Features - On chip Hall sensor - Rotor-locked shutdown - Automatically restart - Frequency generator (FG) output - Buil t-in Zener protection for output driver - Operating voltage: 3.8V~20V - Output current: IO(AVE) = 500m A for SIP-5/SOT89-5 - Output current: IO(AVE) = 400m A for SOT23-5 - Package: SIP-5L, SOT23-5L, SOT89-5L - General Description AH285 is a monolithic fan motor controller with Hall sensor’s capability. It contains two plementary open-drain transistors as motor coil drivers, automatic lock current shutdown, and recovery protections. Additional, frequency generator (FG) output is for speed detection relatively. To avoid coil burning, rotor-lock shutdown detection circuit shut down the output driver if the rotor is blocked and then the automatic recovery circuit will try to restart the motor. This function repeats while the rotor is blocked. Until the blocking is removed, the motor recovers running normally. - Pin Configuration 285 ( Front View ) 1 : FG 2 : Vdd 3 : DO 4 : DOB 5 : GND 1 2 3 4 5 - Pin Descriptions Symbol FG Vdd DO DOB GND Description Frequency generation Input power Output pin Output pin Ground SIP-5L Vdd 5 Vdd 1 GND 2 DO 3 SOT89-5L 285 7 4 DOB 5 FG 285 DOB 4 1 FG GND DO SOT23-5 - Ordering Information AH285 X - X X X Wafer Body Blank or A~Z : if necessary to specify Package P: SIP-5L W: SOT23-5L Y: SOT89-5L Lead L : Lead Free Packing Blank : Bulk A : Tape & Reel (for SOT Packages...