AH286 Datasheet | Anachip

Features - On chip Hall sensor - Rotor-locked shutdown - Automatically restart - Rotor-state detection (RD) output - Buil t-in Zener protection for output driver - Operating voltage: 3.8V~20 V - Output current: IO(AVE) = 500m A for SIP-5/SOT89-5 - Output current: IO(AVE) = 400m A for SOT23-5 - Package: SIP-5L, SOT23-5L, SOT89-5L - General Description AH286 is a monolithic fan motor controller with Hall sensor’s capability. It contains two plementary open-drain transistors for motor’s coil driving, automatic lock current shutdown, and recovery protections. In addition, rotor-state detection (RD) output is for Rotor-state detection. To avoid coil burning, rotor-lock shutdown detection circuit shut down the output driver if the rotor is blocked and then the automatic recovery circuit will try to restart the motor. This function repeats while the rotor is blocked. Until the blocking is removed, the motor recovers running normally. - Pin Configuration 286 ( Front View ) 1 : RD 2 : Vdd 3 : DO 4 : DOB 5 : GND 1 2 3 4 5 - Pin Descriptions Symbol RD Vdd DO DOB GND Description Rotor-state detection Input power Output pin Output pin Ground SIP-5L Vdd 5 Vdd 1 GND 2 DO 3 SOT89-5L 286 7 4 DOB 5 RD 286 DOB 4 RD GND DO SOT23-5 - Ordering Information AH286 X - X X X Wafer Body Blank or A~Z : if necessary to specify Package P: SIP-5L W: SOT23-5L Y: SOT89-5L Lead L : Lead Free Packing Blank : Bulk A : Tape & Reel (for SOT Packages Only) This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent acpany the sale of the product. Rev. 1.0 Sep 29, 2005 1/9 Hall-Effect Smart Fan Motor Controller - Block Diagram (SIP5) Vdd 2 Lock shutdown and Automatic recovery Regulator Hall...