Datasheet4U Logo Datasheet4U.com

AD53508 - PPMU Circuit

General Description

The AD53508 is a custom dual-channel parametric measurement circuit for use in semiconductor automatic test equipment.

It contains programmable modes to force a pin voltage and measure its current or to integrate and hold a current value.

Key Features

  • Dual Measurement Channels Precision Four-Quadrant-Per-Pin V/I Source Programmable Current Force Ranges ؎204.8 ␮A and ؎2.048 mA Five Current Measurement Ranges 204.8 nA to ؎2.048 mA Output Voltage Range:.
  • 4 V to +9 V Power Supplies: +15 V, +5 V, and.
  • 10 V 44-Lead Plastic J-Leaded Chip Carrier Package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AD5354 Low Power 20bit AKM
AD5300T 300V 5A Ultra Low VF Schottky AP Semiconductor
AD500-9 Avalanche Photodiode Silicon Sensor
AD500-9 APD First Sensor
AD500-9-400M-TO5 APD Hybrid First Sensor

Other Datasheets by Analog Devices

Part Number Description
AD53500 High Speed/ High Current Capability Pin Driver
AD53509 High-Performance Driver/Comparator Active Load on a Single Chip
AD535 ANALOG DIVIDER
AD53513 Quad Ultrahigh-Speed Pin Driver with High-Z and VTERM Modes
AD53522 High Speed Dual Pin Electronic

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
a PPMU Circuit AD53508 FEATURES Dual Measurement Channels Precision Four-Quadrant-Per-Pin V/I Source Programmable Current Force Ranges ؎204.8 ␮A and ؎2.048 mA Five Current Measurement Ranges 204.8 nA to ؎2.048 mA Output Voltage Range: –4 V to +9 V Power Supplies: +15 V, +5 V, and –10 V 44-Lead Plastic J-Leaded Chip Carrier Package APPLICATIONS Can Be Used with the AD53032 DCL to Extend Current Force Range to 35 mA GENERAL DESCRIPTION The AD53508 is a custom dual-channel parametric measurement circuit for use in semiconductor automatic test equipment. It contains programmable modes to force a pin voltage and measure its current or to integrate and hold a current value. Alternatively, a current can be forced and the compliance voltage measured.