AD633-EP Datasheet | Analog Devices

Features 4-quadrant multiplication Low cost, 8-lead SOIC package plete- no external ponents required Laser-trimmed accuracy and stability Total error within 2% of full scale Differential high impedance X and Y inputs High impedance unity-gain summing input Laser-trimmed 10 V scaling reference ENHANCED PRODUCT Features Supports defense and aerospace applications (AQEC standard) Military temperature range (- 55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request APPLICATIONS Multiplication, division, squaring Modulation/demodulation, phase detection Voltage-controlled amplifiers/attenuators/filters GENERAL DESCRIPTION The AD633-EP is a functionally plete, four-quadrant, analog multiplier. It includes high impedance, differential X and Y inputs, and a high impedance summing input (Z). The low impedance output voltage is a nominal 10 V full scale provided by a buried Zener. The AD633-EP is laser calibrated to a guaranteed total accuracy of 2% of full scale. Nonlinearity for the Y input is typically less than 0.1% and noise referred to the output is typically less than 100 µV rms in a 10 Hz to 10 k Hz bandwidth. A 1 MHz bandwidth, 20 V/µs slew rate, and the ability to drive capacitive loads make the AD633-EP useful in a wide variety of applications where simplicity and cost are key concerns. The versatility of the AD633-EP is not promised by its simplicity. The Z input provides access to the output buffer amplifier, enabling the user to sum the outputs of two or more multipliers, increase the multiplier gain, convert the output voltage to a current, and configure a variety of applications. For further information, see the Multiplier Application Guide. Low Cost Analog Multiplier FUNCTIONAL BLOCK DIAGRAM X1 X2 1 10V Y1 1 Y2 16494-001 Figure 1. The AD633-EP is available in an 8-lead SOIC package. It is specified to operate over the - 55°C...