Datasheet4U Logo Datasheet4U.com

ADM2867E - RS-485 Transceiver

Description

The ADM2867E is a 5.7 kV rms signal and power isolated full duplex RS-485 transceiver which passes radiated emissions testing to the EN55022 Class B standard with margin on a 2layer PCB using two small external 0402 ferrites on isolated power and ground pins.

Features

  • 5.7 kV rms isolated full duplex RS-485/RS-422 transceiver Low radiated emissions integrated isolated dc-to-dc converter Meets EN55022 Class B radiated emissions requirements on a 2-layer PCB Cable invert smart feature Correct reversed cable connection on A, B, Y, and Z bus pins while maintaining full receiver fail-safe feature IEC 61000-4-2 ESD protection to ±12 kV contact, ±15 kV air on RS-485 A, B, Y, and Z pins High speed 25 Mbps data rate Flexible power supplies VCC of 3 V to 5.5 V VIO of 1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADM28P10E P-Channel MOSFET ADV
ADM200 Motor Operated Auto Drain SMC
ADM200N04 N-Channel MOSFET ADV
ADM200N06 N-Channel MOSFET ADV
ADM20N06D N-Channel MOSFET ADV

Other Datasheets by Analog Devices

Part Number Description
ADM202 CMOS RS-232 Driver/Receiver
ADM202E RS-232 Line Drivers/Receivers
ADM203 CMOS RS-232 Driver/Receivers
ADM205 0.1 uF/ +5 V Powered CMOS RS-232 Drivers/Receivers
ADM206 5V Powered CMOS RS-232 Drivers/Receivers

Full PDF Text Transcription

Click to expand full text
5.7 kV RMS Signal and Power Isolated RS-485 Transceiver with ±15 kV IEC ESD Preliminary Technical Data ADM2867E FEATURES 5.7 kV rms isolated full duplex RS-485/RS-422 transceiver Low radiated emissions integrated isolated dc-to-dc converter Meets EN55022 Class B radiated emissions requirements on a 2-layer PCB Cable invert smart feature Correct reversed cable connection on A, B, Y, and Z bus pins while maintaining full receiver fail-safe feature IEC 61000-4-2 ESD protection to ±12 kV contact, ±15 kV air on RS-485 A, B, Y, and Z pins High speed 25 Mbps data rate Flexible power supplies VCC of 3 V to 5.5 V VIO of 1.7 V to 5.5 V VSEL pin to select VISO of 3.3 V (VCC > 3 V) or 5 V (VCC > 4.
Published: |