ADN2928 Datasheet | Analog Devices

FEATURES Fully integrated limiting amplifier and signal conditioner transceiver IC Meets XFP Teles and Datas module requirements Supports OC-192, OC-192-FEC, 10GE, 10GFC, 10GE G.709 Line and system loop-back modes Integrated Rx limiting amplifier with 10 m V sensitivity Tx path equalizer for up to 12 inches of FR4 Rx loss of signal (LOS) detector CML serial data interface Supply power: 760 m W 3.3 V and 1.8 V power supplies XFI signalling Flip-chip, 49-pin BGA, 6 mm × 6 mm package Temperature range 0°C to 85°C Power down mode PRODUCT OVERVIEW The ADN2928 provides the transmit and receive functions of quantization, loss of signal detect, and clock and data recovery at rates from 9.953 Gbps to 11.1 Gbps. The part is designed with the flexibility to allow it to be used in either Teles or Datas XFP module applications. The key advantages of this circuit’s delay and phase-locked loop architecture are that it provides a low jitter transfer bandwidth of 1 MHz, while also exceeding the jitter tolerance requirements of XFP, SONET, Gigabit Ethernet and Fibre Channel. The architecture also provides fundamentally 0 d B of Jitter peaking. APPLICATIONS XFP MSA module receive/transmit signal conditioner SONET OC-192, (+FEC) transponders 10 gigabit Ethernet optical transceivers 10 gigabit small form factor modules Test equipment Serial backplane applications XFP MODULE 12” FR4 TXDATA OTX ORX XFP MODULE 12” FR4 RXDATA SERDES/ ASIC 12” FR4 12” FR4 SERDES/ ASIC Figure 1. Typical XFP Application Rev. Pr B Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of...