Datasheet4U Logo Datasheet4U.com

ADP5030 - High Performance RF LDO

General Description

The ADP5030 combines two high performance, low dropout (LDO) voltage regulators, a low RDSON load switch, and level shifti

Key Features

  • Input voltage range: 2.5 V to 5.5 V Dual, 200 mA low dropout voltage regulators Tiny, 16-ball, 1.6 mm × 1.6 mm WLCSP Initial accuracy: ±0.7% Stable with 1 μF ceramic output capacitors Overcurrent and thermal protection High PSRR 76 dB up to 1 kHz 70 dB at 10 kHz 60 dB at 100 kHz 40 dB at 1 MHz Low output noise 27 μV rms typical output noise at VOUTx = 1.2 V 50 μV rms typical output noise at VOUTx = 2.8 V Excellent transient response Low dropout voltage: 175 mV at 200 mA load 60 μA typical ground.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADP5100 Pressure sensor Panasonic
ADP5101 Pressure sensor Panasonic
ADP5110 Pressure sensor Panasonic
ADP5111 Pressure sensor Panasonic
ADP5120 Pressure sensor Panasonic

Other Datasheets by Analog Devices

Part Number Description
ADP5033 800mA Buck Regulators
ADP5034 1200 mA Buck Regulators
ADP5037 800 mA Buck Regulators
ADP5014 Integrated Power
ADP5020 Power Management

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Dual, 200 mA, High Performance RF LDO with Load Switch ADP5030 FEATURES Input voltage range: 2.5 V to 5.5 V Dual, 200 mA low dropout voltage regulators Tiny, 16-ball, 1.6 mm × 1.6 mm WLCSP Initial accuracy: ±0.7% Stable with 1 μF ceramic output capacitors Overcurrent and thermal protection High PSRR 76 dB up to 1 kHz 70 dB at 10 kHz 60 dB at 100 kHz 40 dB at 1 MHz Low output noise 27 μV rms typical output noise at VOUTx = 1.2 V 50 μV rms typical output noise at VOUTx = 2.8 V Excellent transient response Low dropout voltage: 175 mV at 200 mA load 60 μA typical ground current at no load, both LDOs enabled Guaranteed 200 mA output current per regulator Load switch with low RDSON of 100 mΩ at 1.