Datasheet4U Logo Datasheet4U.com

ADXL362 - Digital-Output MEMS Accelerometer

General Description

The ADXL362 is an ultralow power, 3-axis MEMS accelerometer that consumes less than 2 µA at a 100 Hz output data rate and 270 nA when in motion triggered wake-up mode.

Key Features

  • Ultra low power.
  • Power can be derived from coin cell battery.
  • 1.8 µA at 100 Hz ODR, 2.0 V supply.
  • 3.0 µA at 400 Hz ODR, 2.0 V supply.
  • 270 nA motion activated wake-up mode.
  • 10 nA standby current.
  • High resolution: 1 mg/LSB.
  • Built-in features for system level power savings:.
  • Adjustable threshold sleep/wake modes for motion activation.
  • Autonomous interrupt processing, without need for microcon- troller intervention, to allow the rest of the system t.

📥 Download Datasheet

Other Datasheets by Analog Devices

Part Number Description
ADXL363 Micropower 3-Sensor Combination Including Acceleration/Temperature
ADXL367 Digital Output MEMS Accelerometer
ADXL311 Low Cost Ultracompact 2 g Dual-Axis Accelerometer
ADXL312 Digital Accelerometer
ADXL313 Digital Accelerometer
ADXL314 3-Axis Digital Accelerometer
ADXL316 Small Low Power Accelerometer
ADXL320 Small and Thin 5g Accelerometer
ADXL321 Small and Thin 18g Accelerometer
ADXL322 Small and Thin +-2 g Accelerometer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet ADXL362 Micropower, 3-Axis, ±2 g/±4 g/±8 g Digital Output MEMS Accelerometer FEATURES ► Ultra low power ► Power can be derived from coin cell battery ► 1.8 µA at 100 Hz ODR, 2.0 V supply ► 3.0 µA at 400 Hz ODR, 2.0 V supply ► 270 nA motion activated wake-up mode ► 10 nA standby current ► High resolution: 1 mg/LSB ► Built-in features for system level power savings: ► Adjustable threshold sleep/wake modes for motion activation ► Autonomous interrupt processing, without need for microcon- troller intervention, to allow the rest of the system to be turned off completely ► Deep embedded FIFO minimizes host processor load ► Awake state output enables implementation of standalone, motion activated switch ► Low noise down to 175 µg/√Hz ► Wide supply and I/O voltage ranges: 1.6 V to 3.