ADXL367 Datasheet PDF | Analog Devices

Analog Devices ADXL367

The ADXL367 is an ultralow power, 3-axis microelectromechanical systems (MEMS) accelerometer that consumes only 0.89 µA at a 100 Hz output data rate and 180 nA when in motion-triggered wake-up mode. The ADXL367 always provides 14-bit output resolution. Unlike accelerometers that use power duty cycling to achieve low power consumption, the ADXL367 does not alias input signals by undersampling, but samples the full bandwidth of the sensor at all data rates.

Part No.	ADXL367
Datasheet	ADXL367 Download
Manufacturer	Analog Devices
Description	Digital Output MEMS Accelerometer
Buy	Stock & Price

FEATURES

► Supply voltage range ► Single-cell battery operation: 1.1 V to 3.6 V ► Internal power supply regulation for high PSRR ► Ultralow power ► 0.89 µA at 100 Hz ODR, 2.0 V supply ► 180 nA motion activated wake-up mode ► 40 nA standby current ► High resolution: 0.25 mg/LSB ► Built-in features for system level power savings ► Single-tap and double-tap detection with only 35 nA of added current ► Adjustable threshold sleep and wake-up modes for motion activation ► Autonomous interrupt processing, without need for microcontroller intervention, to allow the rest of the system to be turned off completely ► Deep 512 sample embedded FIFO minimizes host processor load ► Awake state output enables implementation of motion activated switch ► Low noise to 170 µg/√Hz ► Acceleration sample synchronization via external trigger ► On-chip temperature sensor ► Internal two-pole antialias filter ► SPI (4-wire) and I2C digital interfaces ► Small and thin 2.2 mm × 2.3 mm × 0.87 mm package

APPLICATIONS

...