Datasheet4U Logo Datasheet4U.com

MAX77958 - Standalone USB Type-C and USB Power Delivery Controller

General Description

The MAX77958 is a robust solution for USB Type-C CC detection and power delivery (PD) protocol implementation.

It detects connected accessories or devices by using Type-C CC detection and USB PD messaging.

Key Features

  • Supports Autonomous or MCU Based Configuration.
  • No Firmware Development Needed in Autonomous Configuration.
  • Customizable Based on.

📥 Download Datasheet

Datasheet Details

Part number MAX77958
Manufacturer Analog Devices
File Size 1.32 MB
Description Standalone USB Type-C and USB Power Delivery Controller
Datasheet download datasheet MAX77958 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX77958 Standalone USB Type-C and USB Power Delivery Controller Maxim Integrated
MAX77950 WPC/PMA Dual Mode Wireless Power Receiver Maxim Integrated
MAX779 Setp up DC-DC Converters Maxim Integrated
MAX77960 USB-C Buck-Boost Charger Maxim Integrated
MAX77961 USB-C Buck-Boost Charger Maxim Integrated

Other Datasheets by Analog Devices

Part Number Description
MAX77963 23VIN 3.2AOUT Buck-Boost Charger
MAX77348A Low-Noise 3.5W Buck-Boost Converter
MAX77348B Low-Noise 3.5W Buck-Boost Converter
MAX77505 4.6A Switching Current Low IQ Buck Converter
MAX77658 Ultra-Low Power PMIC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE MAX77958 Standalone USB Type-C and USB Power Delivery Controller General Description The MAX77958 is a robust solution for USB Type-C CC detection and power delivery (PD) protocol implementation. It detects connected accessories or devices by using Type-C CC detection and USB PD messaging. The IC protects against overvoltage and overcurrent, and detects moisture and prevents corrosion on the USB TypeC connector. The IC also has a D+/D- USB switch and BC1.2 detection to support legacy USB standards. It contains VCONN switches for USB PD and an enable pin for an external VCONN boost or buck converter. When the USB PD negotiation is complete, the IC configures an alternate mode setting for external multiplexers.