Datasheet4U Logo Datasheet4U.com

AIC1520 - Single High-Side Power Switch

General Description

The AIC1520 is an integrated high-side power self-powered and bus-powered Universal Serial Bus (USB) applications.

which meets USB voltage drop requirements for maximum transmission wire length.

Key Features

  • l l l l.
  • 120mW (5V Input) High-Side MOSFET Switch. 500mA Continuous Load Current. 80mA Typical On-State Supply Current. Current-Limit / Short Circuit Protection. Thermal Limiting Protection under Overcurrent Condition. l n.

📥 Download Datasheet

Datasheet Details

Part number AIC1520
Manufacturer Analog Intergrations Corporation
File Size 212.56 KB
Description Single High-Side Power Switch
Datasheet download datasheet AIC1520 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AIC1531 500mA Dual Linear Regulator AIC
AIC1532 500mA DUAL REGULATOR AIC
AIC1084 5A Low Dropout Positive Adjustable Regulator Analog Integrations
AIC111 IC Design Specification 1.3-V microPower(TM) DSP/uC Voice Band Audio CODEC (Rev. A) ETCTI
AIC1221 Ultra LDO 2A Linear Regulator aic

Other Datasheets by Analog Intergrations Corporation

Part Number Description
AIC1521 Single High-Side Power Switch With Control Function
AIC1523 500mA Power Distribution Switch
AIC1525 USB High-Side Power Switch
AIC1526 Dual USB High-Side Power Switch
AIC1527 Quad USB High-Side Power Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AIC1520 Single High-Side Power Switch n FEATURES l l l l ยท 120mW (5V Input) High-Side MOSFET Switch. 500mA Continuous Load Current. 80mA Typical On-State Supply Current. Current-Limit / Short Circuit Protection. Thermal Limiting Protection under Overcurrent Condition. l n DESCRIPTION switch for The AIC1520 is an integrated high-side power self-powered and bus-powered Universal Serial Bus (USB) applications. The high-side switch is a MOSFET with 120mW RDS(ON), which meets USB voltage drop requirements for maximum transmission wire length. Output current is typically limited to 1.0A, well below the 5A safety requirement, and thermal shutdown function shuts the switch off to prevent damage under overcurrent conditions.