Datasheet4U Logo Datasheet4U.com

AIC1527 - Quad USB High-Side Power Switch

General Description

The AIC1527 is a quad high-side power switch for self-powered and bus-powered Universal Serial Bus (USB) applications.

One high-side switch is a MOSFET with 110mΩ RDS(ON), which meets USB voltage drop requirements for maximum transmission wire length.

USB Power Management.

Key Features

  • 110mΩ (5V Input) High-Side MOSFET Switch. l 500mA Continuous Load Current per Channel. l 220µA Typical On-State Supply Current. l 1µA Typical Off-State Supply Current. l Current-Limit / Short Circuit Protection. l Thermal Shutdown Protection under Overcurrent Condition. l Undervoltage Lockout Ensures that Switch is off at Start Up. l Output can be Forced Higher than Input (Off-State). l Open-Drain Fault Flag. l Slow Turn ON and Fast Turn OFF. l Enable Active-High or Active-Low. n DES.

📥 Download Datasheet

Datasheet Details

Part number AIC1527
Manufacturer Analog Intergrations Corporation
File Size 158.11 KB
Description Quad USB High-Side Power Switch
Datasheet download datasheet AIC1527 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AIC1531 500mA Dual Linear Regulator AIC
AIC1532 500mA DUAL REGULATOR AIC
AIC1084 5A Low Dropout Positive Adjustable Regulator Analog Integrations
AIC111 IC Design Specification 1.3-V microPower(TM) DSP/uC Voice Band Audio CODEC (Rev. A) ETCTI
AIC1221 Ultra LDO 2A Linear Regulator aic

Other Datasheets by Analog Intergrations Corporation

Part Number Description
AIC1520 Single High-Side Power Switch
AIC1521 Single High-Side Power Switch With Control Function
AIC1523 500mA Power Distribution Switch
AIC1525 USB High-Side Power Switch
AIC1526 Dual USB High-Side Power Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AIC1527 Quad USB High-Side Power Switch n FEATURES • 110mΩ (5V Input) High-Side MOSFET Switch. l 500mA Continuous Load Current per Channel. l 220µA Typical On-State Supply Current. l 1µA Typical Off-State Supply Current. l Current-Limit / Short Circuit Protection. l Thermal Shutdown Protection under Overcurrent Condition. l Undervoltage Lockout Ensures that Switch is off at Start Up. l Output can be Forced Higher than Input (Off-State). l Open-Drain Fault Flag. l Slow Turn ON and Fast Turn OFF. l Enable Active-High or Active-Low. n DESCRIPTION The AIC1527 is a quad high-side power switch for self-powered and bus-powered Universal Serial Bus (USB) applications.