Datasheet4U Logo Datasheet4U.com

AME5106 - PWM Control 2A Buck Converter

General Description

AME5106 provides low-ripple power, high efficiency, and excellent transient characteristics.

The PWM control circuit is able to vary the duty ratio linearly from 0 up to 100%.

Key Features

  • as low current consumption. Since this converter can accommodate an input voltage up to 18V, it is also suitable for the operation via an AC adapter. PWM Control 2A Buck Converter n.

📥 Download Datasheet

Datasheet Details

Part number AME5106
Manufacturer Analog Microelectronics
File Size 252.53 KB
Description PWM Control 2A Buck Converter
Datasheet download datasheet AME5106 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AME5170 Low Cost Micro Power Boost DC/DC Converter AME
AME5172 0.85V Single Cell Boost DC-DC Converter AME
AME50461 ADVANCED ANALOG EMI FILTER International Rectifier
AME5258 600mA Synchronous Buck Converter AME
AME5268 340KHz Synchronous Rectified Step-Down Converter AME

Other Datasheets by Analog Microelectronics

Part Number Description
AME5104 DC/DC Buck Converter
AME5107 PWM Control 3A Buck Converter
AME5110 PWM Buck DC-DC Converter
AME5130 Micropower Step-Up DC/DC Converter
AME5131 Low Power DC/DC Boost Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AME, Inc. AME5106 n General Description AME5106 provides low-ripple power, high efficiency, and excellent transient characteristics. The PWM control circuit is able to vary the duty ratio linearly from 0 up to 100%. This converter also contains an error amplifier cirwww.DataSheet4U.com cuit as well as a soft-start circuit that prevents overshoot at startup. An enable function, an over current protect function and a short circuit protect function are built inside, and when OCP or SCP happens, the operation frequency will be reduced from 350KHz to 30KHz. Also, an internal compensation block is built in to minimum external component count.