LPT25 Datasheet | Astec America

Features - - - - - - - - - - - - Universal input 3" x 5" footprint Less than 1U high Remote sense on main output Terminal block option (-T) Built-in EMI filter Low output ripple Adjustable main output Overvoltage protection Overload protection 110 KHz switching frequency LPX40 enclosure kit available Input Input range Frequency Inrush current Input current Efficiency EMI 85-264 VAC 120-300 VDC 47-440 Hz <15A peak @ 115VAC; <30A peak @ 230VAC, cold start @ 25°C 1 A max. (RMS) @ 115 VAC 70% typical at full load FCC Class B conducted; CISPR 22 Class B conducted EN55022 Class B conducted; VDE 0878 PT3 Class B conducted <0.5 m A @ 50/60 Hz, 264 VAC input Safety ground leakage current Output Maximum Power Cross regulation Adjustment range Hold-up time Overload protection Overvoltage protection Remote sense 25W for convection; 40W with 30CFW forced air ±2% on output 1; ±5% on outputs 2, 3 -5, +10% minimum 20 ms @ 25 W load, 115 VAC nominal line Short circuit protection on all outputs. Case overload protected @ 110% to 145% above peak rating 5.7 to 6.7 VDC on the main output pensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Safety VDE 0805 EN60950 (IEC950) 11774-3336-1241 (LC#84936) UL UL1950 E132002 CSA CSA 22.2-234 Level 3 LR53982C NEMKO EN 60950/EMKO-TUE P95100411 (74-sec) 203 CB Certificate and report 1569, 1570, 1571, 1572 CE Mark (LVD) Embedded Power for Business-Critical Continuity Environmental Specifications Operating temperature: Electromagnetic susceptibility: Humidity: Vibration: 0° to 50°C ambient derate each output at 2.5% per degree from 50° to 70°C, -20°C start up. Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Operating; non-condensing 5% to 95% Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5 Hz to 500 Hz, operational -40° to 85°C ±.04% per °C >550,000 hours at full load and 25°C ambient conditions Rev. 04.13.06 LPT25 Series 2 of 3 Storage...