Datasheet4U Logo Datasheet4U.com

HCPL-3000 - Power Bipolar Transistor Base Drive Optocoupler

General Description

The HCPL-3000 consists of a Silicon-doped GaAs LED optically coupled to an integrated circuit with a power output stage.

This optocoupler is suited for driving power bipolar transistors and power Darlington devices used in motor control inverter applications.

Key Features

  • High output current: IO2 (2.0 A Peak, 0.6.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HCPL-3000 Power Bipolar Transistor Base Drive Optocoupler HP
HCPL-3100 Power MOSFET/IGBT Gate Drive Optocouplers Agilent
HCPL-3100 Power MOSFET/IGBT Gate Drive Optocouplers HP
HCPL-3101 Power MOSFET/IGBT Gate Drive Optocouplers HP
HCPL-3120 Agilent 2.5 Amp Output Current IGBT Gate Drive Optocoupler Agilent

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
HCPL-3020 (HCPL-3020 / HCPL-0302) 0.4 Amp Output Current IGBT Gate Drive Optocoupler
HCPL-3120 2.5 Amp Output Current IGBT Gate Drive Optocoupler
HCPL-3140 0.4 Amp Output Current IGBT Gate Drive Optocoupler
HCPL-314J 0.4 Amp Output Current IGBT Gate Drive Optocoupler
HCPL-3150 0.5 Amp Output Current IGBT Gate Drive Optocoupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HCPL-3000 Power Bipolar Transistor Base Drive Optocoupler Data Sheet Description The HCPL-3000 consists of a Silicon-doped GaAs LED optically coupled to an integrated circuit with a power output stage. This optocoupler is suited for driving power bipolar transistors and power Darlington devices used in motor control inverter applications. The high peak and steady state current capabilities of the output stage allow for direct interfacing to the power device without the need for an intermediate amplifier stage. With a CMR rating of 10 kV/µs this optocoupler readily rejects transients found in inverter applications. The LED controls the state of the output stage. Transistor Q2 in the output stage is on with the LED off, allowing the base of the power device to be held low.