AP3607 Datasheet | BCD Semiconductor

Data Sheet 4/6 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER AP3606/AP3607 General Description The AP3606 and AP3607 are step-up DC-DC converters based on 1x/1.5x charge pump and low dropout current sink, which helps them maintain the highest efficiency. The AP3606 is specially designed to drive up to 4 WLEDs in backlight display while the AP3607 is designed for 6 WLEDs. These devices provide up to 20m A current for each WLED. There are totally 16 steps of current control, which is achieved through a digital pulse dimming function on EN pin. Additionally, 1MHz high switching frequency enables the use of small external capacitors. Internal soft-start circuitry prevents excessive inrush current during start-up and mode transition. The supply voltage ranges of AP3606 and AP3607 are from 2.7V to 5.5V which make them ideally suit for applications powered by Li-ion battery. These ICs are available in the tiny package of QFN-3×3-16. Features - Regulated Output Current with ±3% Matching - Drives up to 4 WLEDs at 20m A Each (AP3606) Drives up to 6 WLEDs at 20m A Each (AP3607) - 16 Steps Brightness Control Using Pulse Signal Dimming - Wide Operating Voltage Range: 2.7V to 5.5V - High Operating Frequency: 1MHz - Auto 1x/1.5x Charge Pump Mode Selection - Built-in Soft-start - Output Over Voltage Protection - Built-in UVLO - Built-in OTSD - Operating Temperature Range: -40°C to 85°C Applications - Mobile Phone - PDA - MP3/4 QFN-3×3-16 Figure 1. Package Type of AP3606/AP3607 Jan. 2013 Rev. 1. 5 BCD Semiconductor Manufacturing Limited...