Datasheet4U Logo Datasheet4U.com

AP3608E - EIGHT-CHANNEL CONSTANT CURRENT SINK

General Description

The AP3608E is an eight-channel constant current sink with current match used for LED driver.

It uses an external resistor to set the current for eight LED strings with an accuracy of ±1.5%.

The full scale LED current can be adjusted from 10mA to 100mA for each channel.

Key Features

  • under voltage lockout protection and over temperature protection. The AP3608E has four interface terminals (FB, SDB, FBX and SDBX pins). The first two terminals allow the device to work with a DC/DC converter to drive LED arrays for good performance. And the other two enable the device to be connected in parallel. The AP3608E is available in QFN-4×4-24, TSSOP20(EDP) and SOIC-20 packages. Features.
  • Input Voltage Range: 4.2V to 5.5V Typical Out.

📥 Download Datasheet

Datasheet Details

Part number AP3608E
Manufacturer BCD Semiconductor
File Size 498.49 KB
Description EIGHT-CHANNEL CONSTANT CURRENT SINK
Datasheet download datasheet AP3608E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP3600 1/4 INCH DIAPHRAGM VALVE APTech
AP3601N P-CHANNEL ENHANCEMENT MODE POWER MOSFET Advanced Power Electronics
AP3603 High Power Dual Output Step-Up DC-DC Controller AKM
AP3625 1/4 INCH DIAPHRAGM VALVE APTech
AP3625FA 1/4 INCH DIAPHRAGM VALVE APTech

Other Datasheets by BCD Semiconductor

Part Number Description
AP3602A REGULATED CHARGE PUMP
AP3602B REGULATED CHARGE PUMP
AP3605 4-Channel Charge Pump LED Driver
AP3606 4/6 CHANNEL CHARGE PUMP CURRENT SINK
AP3607 4/6 CHANNEL CHARGE PUMP CURRENT SINK

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet EIGHT-CHANNEL CONSTANT CURRENT SINK WITH CURRENT MATCH AP3608E General Description The AP3608E is an eight-channel constant current sink with current match used for LED driver. It uses an external resistor to set the current for eight LED strings with an accuracy of ±1.5%. The full scale LED current can be adjusted from 10mA to 100mA for each channel. The LED light can be adjusted by PWM dimming function. The device can keep working when LED opens without damage. It features under voltage lockout protection and over temperature protection. The AP3608E has four interface terminals (FB, SDB, FBX and SDBX pins). The first two terminals allow the device to work with a DC/DC converter to drive LED arrays for good performance.