AP3700 Datasheet | BCD Semiconductor

Data Sheet LOW POWER PWM CONTROLLER FOR OFF-LINE BATTERY CHARGER General Description Features AP3700/A The AP3700/A is a green-mode pulse width modulation (PWM) controller. It is specially designed for low power applications such as off-line battery chargers, where the needs for low standby power, space saving and low cost are all required. In a battery charger rated 5V/1A, the maximum standby power is only 0.18W. In normal operation, the AP3700/A switches on and off at a fixed switching frequency of 60 k Hz. With a current limit capability of 460m A for AP3700 and 500m A for AP3700A, the AP3700/A can directly drive the emitter of high voltage NPN transistor. When output power falls below a given level, the IC enters skip cycle mode to reduce power consumption. The AP3700/A also Features under-voltage lockout, over-current and short circuit protections. - Current Mode Control with Skip Cycle Capability - Lower Operating Current: 0.45m A - Fixed Switching Frequency: 60 k Hz - Frequency Dithering for Low EMI: ±2.5k Hz - Under-Voltage Lockout Protection - Over-Current Protection - Internal Short Circuit Protection - Higher Output Voltage at OUT Terminal - Low Total Cost Solution Applications - Battery Chargers - Off-Line Power Supplies The AP3700/A is available in TO-92 package. Mar. 2008 Rev. 1. 4 TO-92 (Bulk Packing) TO-92 (Ammo Packing) Figure 1. Package Types of AP3700/A BCD Semiconductor Manufacturing Limited 1 Data Sheet LOW POWER PWM CONTROLLER FOR OFF-LINE BATTERY CHARGER Pin Configuration AP3700/A...