AP2810 Datasheet | BCD

Advance Datasheet 1.0A High-side Power Distribution Switch with Enable and Flag General Description The AP2810 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS (ON), 60mΩ, design easily to meet USB voltage drop requirements. It includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout (UVLO) function is used to ensure the device remain off unless there is a valid input voltage present. A Flag output is available to indicate fault conditions to the local USB controller. The AP2810 is available in standard packages of SOIC-8 and MSOP-8. Features - Low MOSFET on Resistance: 60mΩ @VIN=5.0V - pliant to USB Specifications - Operating Voltage Range: 2.7V to 5.5V - Low Supply Current: 65µA (Typ) - Low Shutdown Current: 1.0µA (Max) - Guarantee 1.0A Continuous Load - Current Limit: 1.1A (Min), 2.1A (Max) - Under-voltage Lockout - Logic Level Enable Pin: Available in Active-high or Active-low Version - Over-current Protection - Over Temperature Protection - Load Short Protection with Fold-back - No Reverse Current When Power off - With Output Shutdown Pull-low Resistor for A/C Versions Applications - USB Power Management - USB Bus/Self Powered Hubs - Hot-plug Power Supplies - Battery-charger Circuits - Notebooks, Motherboard PCs Jul. 2012 Rev 1....