AP2815 Datasheet | BCD

Advance Datasheet 1.5A High-side Power Distribution Switch with Enable and Flag General Description The AP2815 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS(ON), 60mΩ, is designed to meet the USB voltage drop requirements. The IC integrates soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout (UVLO) function is used to ensure the device remains off unless there is a valid input voltage present. A FLAG output is available to indicate fault conditions to the local USB controller. The AP2815 is available in standard packages of SOIC-8 and MSOP-8. Features - Low MOSFET on Resistance: 60mΩ @ VIN=5.0V - pliant to USB Specifications - Operating Voltage Range: 2.7V to 5.5V - Low Supply Current: 65µA (Typ.) - Low Shutdown Current: 1.0µA (Max) - Guarantee 1.5A Continuous Load - Current Limit: 1.65A (Min), 2.8A (Max) - Under-voltage Lockout - Logic Level Enable Pin: e Available in Active-high or Active-low Version - Soft Start-up - Over-current Protection - Over Temperature Protection - Load Short Protection with Fold-back - No Reverse Current when Power Off - Deglitched FLAG Output with Open Drain - e With Output Shutdown Pull-low Resistor for e A/C Versions - UL Approved (File No. E339337) - Nemko CB Scheme IEC60950-1, Ref. Certif No. NO64001 Applications - USB Power Management - USB Bus/Self Powered Hubs - Hot-plug Power Supplies - Battery-Charger...