MPI-8080 Datasheet | BOSER Technology

Features - Input Voltage: 85~264VAC - Input Frequency: 47~63Hz - Input Current: 3A at 115VAC or 1.5A at 230VAC max. capacitors - Inrush Current: Does not exceed 30A at 115VAC input or 60A at 230VAC input, cold start at 25o C - Load Regulation: With +5V output set between 4.95~5.05V and all output at 60% rated load, and all other outputs in the accuracy range, max. load can not > 80W convection cooling and > 100W forced air cooling - Ripple And Noise: Peak to peak ripple and noise for each output is < 1% of each output voltage at rated load - Line Regulation: < +/-1% at rated load with +/-10% change in input voltage - Load Regulation: < +/-1% for +5V, < +/-5% for other outputs with +/-40% change in measured output loading from 60% rated load and other outputs at 60% rated laod - Hold Up Time: > 16ms at 115VAC input and rated load - Efficiency: > 70% at nominal line and rated load - Altitude: 10,000 feet - Protection: Short Circuit: Hiccup mode against short circuit or over load conditions auto recovery to normal after wrong conditions are removed Output: Built-in crowbar circuit shuts down outputs to avoid damage. Trip point of over voltage protection is between 5.7~7.0V AC line ON/OFF restarts and recovers the unit from .. over voltage protection - Temperature: 0~+50o C, requires forces air of 30CFM for outputs > 80W (operating); -20~+70o C (storage) - Humidity: 5~95%; non-condensing at 40o C (operating) - Dimensions: 15.24 x 8.38 x 3.8 cm within +/-0.4mm tolerance - MTBF: 283,179 hrs. Safety Standards - Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950 - EMI: FCC class B / EN55022 B - EMS: Level 3 of IEC-801, 802, 803, 804 PIN 1~3 4~7 8~9 10 11 12 Output +5V GND +12V -12V -5V N/C PIN 1 2 3 Input AC Line-1 AC Line-2 GND Output Min. Voltage Load +5V 1A +12V 0A -12V 0A -5V 0A Rated Load 6A 3.5A 0.5A 0.5A Max. Load 10A 6A 1A 1A Tolerance +/-0.05V +/-0.75V +/-0.75V +/-0.25V .boser..tw...