BCT642 - High-Speed MIPI Switch

Description

The BCT642 is a bi-directional, low-power, high-speed analog switch.

The pin out is designed to ease differential signal layout and is configured as a triple-pole, double-throw switch (TPDT).

Features

Low On Capacitance:7.0pF Typical.
Low On Resistance:7.0Ω Typical.
Wide -3db Bandwidth:1G Hz Typical.
24-Lead QFN (2.5 x.

BROADCHIP

📥 Download Datasheet

Datasheet Details

Part number	BCT642
Manufacturer	BROADCHIP
File Size	483.92 KB
Description	High-Speed MIPI Switch
Datasheet	BCT642 Datasheet

📁 Similar Datasheet

BCT10-S30-UP6X2-H1151 - Capacitive sensor (Turck)
BCT10-S30-UP6X2T-H1151 - Capacitive sensor (Turck)
BCT5-S18-UN6X2T-H1151 - Capacitive sensor (Turck)
BCT5-S18-UP6X2T-H1151 - Capacitive sensor (Turck)
BCT72328 - LED Driver (BlueChips)
BCT72328S - LED Display Driver and Key Scan (BlueChips)

Other Datasheets by BROADCHIP

BCT644 - 2:1 MIPI D-PHY(1.5Gbps) 4-Data Lane Switch
BCT646 - 2:1 MIPI C-PHY D-PHY 4-Data Lane Switch
BCT0104 - 4-Bit Bidirectional Voltage-Level Translator
BCT1117 - 1A Bipolar Linear Regulator
BCT1117B - 0.8A Bipolar Linear Regulator
BCT1812 - 1.2A 1.5MHz Synchronous Step-Down Converter
BCT1813 - 2A 1.5MHz Synchronous Step-Down Converter
BCT2014 - 0.7uA Low Power Linear Regulators

Full PDF Text Transcription

Click to expand full text

Ver 1.5 BCT642 Low-Power, Three-Port , High-Speed MIPI Switch GENERAL DESCRIPTION The BCT642 is a bi-directional, low-power, high-speed analog switch. The pin out is designed to ease differential signal layout and is configured as a triple-pole, double-throw switch (TPDT). The BCT642 is optimized for switching between two MIPI devices, such as cameras or LCD displays and on-board Multimedia Application Processors (MAP). The BCT642 is compatible with the requirements of Mobile Industry Processor Interface (MIPI). The low-capacitance design allows the BCT642 to switch signals that exceed 500MHz in frequency.

Published: Mar 12, 2019 |