DF-G1 Datasheet | Banner Engineering

.Data Sheet.co.kr - Expert Dual Display Fiber Amplifier Manual Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies Features - Easy to read dual digital displays show both signal level and threshold simultaneously - Lever action fiber clamp provides stable, reliable, and trouble-free fiber clamping - Simple user interface ensures easy sensor set-up and programming via displays and switches/buttons, or remote input teach wire - Expert TEACH and SET methods ensure optimal gain and threshold for all applications, especially low contrast applications - User has full control over all operating parameters: threshold, Light Operate or Dark Operate, output timing functions, gain level, and response speed - Thermally stable electronics minimize warm-up drift and the effect of side-by-side mounting of multiple fiber amplifiers - ECO (economy) display mode reduces amplifier power consumption by 25% - Cross talk avoidance algorithm allows two sensors to operate in close proximity for many applications - Response speeds of: 200 µs (High Speed), 500 µs (Standard), 2 ms (Long Range), and 5 ms (Extra Long Range) allow operator to optimize for fast or long distance applications - Sleek 10 mm wide housing mounts to 35 mm DIN standard rail - Visible red LED sensing beam Models Model DF-G1-NS-2M DF-G1-PS-2M DF-G1-NS-Q3 DF-G1-PS-Q3 DF-G1-NS-Q7 DF-G1-PS-Q7 Outputs Single NPN Single PNP Single NPN Single PNP Single NPN Single PNP Connector- 2 m (6.5') cable, 4-wire 150 mm (6") PVC pigtail, M8 Pico QD connector, 4pin Integral M8 Pico QD connector, 4-pin - Connection options: A model with a QD connector requires a mating cordset (see Quick-Disconnect Cordsets on page 26). For 9 m cable, change the suffix 2M to 9M in the 2 m model number (example, DF-G1-NS-9M). For M12 Euro QD pigtail change the suffix 2M to Q5 in the 2 m model number (example, DF-G1-NS-Q5). WARNING: Not To Be Used for Personnel Protection Never use this product as a...