DF-G1 Datasheet | Banner Engineering

.Data Sheet.co.kr - Expert Fiber Amplifier Install Sheet Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies For the latest technical information about this product, including specifications, dimensions, and wiring, see .Banner Engineering. Overview 1 2 3 4 5 6 Figure 1. DF-G1 Model Features 7 Output LED LO/DO Switch RUN/PRG/ADJ Mode Switch Lever Action Fiber Clamp Red Signal Level Green Threshold +/SET/- Rocker Button Models Model DF-G1-NS-2M DF-G1-PS-2M DF-G1-NS-Q3 DF-G1-PS-Q3 DF-G1-NS-Q7 DF-G1-PS-Q7 Outputs Single NPN Single PNP Single NPN Single PNP Single NPN Single PNP Connector- 2 m (6.5') cable, 4-wire 150 mm (6") PVC pigtail, M8 Pico QD connector, 4-pin Integral M8 Pico QD connector, 4-pin - Cordset Options: A model with a QD connector requires a mating cordset. For 9 m cable, change the suffix 2M to 9M in the 2 m model number (example, DF-G1-NS-9M). For M12 Euro QD pigtail change the suffix 2M to Q5 in the 2 m model number (example, DF-G1-NS-Q5). WARNING: Not To Be Used for Personnel Protection Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Hookups NPN Models PNP Models Key 1 4 1 = Brown 2 = White 3 = Blue 4 = Black 2 3 For cable options, see http://.bannerengineering. P/N 161275 Rev. A 1/6/2012 0 161275 Datasheet pdf - http://..net/ .Data Sheet.co.kr - Expert Fiber Amplifier Install Sheet Top Panel Interface Opening the dust cover provides access to the top panel interface. The top panel interface consists of the RUN/PRG/ADJ mode switch, LO/DO switch, +/SET/- rocker button, dual red/green digital displays, and output LED. RUN/PRG/ADJ Mode Switch The...