XGZP185 Datasheet | CFSensor

FEATURES - Range: -100～0…1k Pa G…1000k Pa G - MEMS technology, solid-state reliability - Good linearity - Surface mounting - For non-corrosive gas or air - Working temp.: -30℃～+100℃(-22℉～+212℉) - Gage pressure type(Positive&Vacuum pressure) - Horizontal structure, space saving. APPLICATIONS - Medical & Healthcare - Industrial & Automation - Domestic Appliance - Consumer Electronic - Automotive Electronic INTRODUCTION XGZP185 is a surface mounting pressure sensor based on CFSensor silicon based piezoresistive pressure sensor die. The sensor die is bonded on a substrate with a plastic cap and packaged in a 6-pin SOP structure. The small size and high reliability of on-chip integration make this sensor a simple and economical choice for high volume application in a variety of industries. With standard SOP6 package, XGZP185 is easy for users to install by SMT . With good repeatability, linearity, stability and sensibility, XGZP185 is very facile for users to calibrate output & thermal drift and make temperature pensation by using exterior operational amplifier or integrated circuit.(For amplified output or I2C interface if required, please refer to CFSensor calibrated pressure sensor series: XGZP6863) The XGZP185 pressure sensor is intended for using with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application. Please consult us if a pressure medium other then air is to be used. XGZP185_Data Sheet_EN_V1.1 .CFSensor. 1/9 Unamplified Pressure Sensor Series V1.1/20240823 PERFORMANCE CHARACTERISTICS Unless otherwise specified,measurements were taken with a constant current of 1m A at a temperature of 25± 1℃ and humidity ranging 50%±10%RH. CHARACTERISTIC TYP. MAX UNIT Pressure Range① 1, 3, 7, 40,100,200,700,1000 k Pa Supply Voltage Vdc Supply...