CM2400-02 Datasheet | CMD

Features - - - - - - - - - - - - plies with USB Specification Rev 1.1 & 2.0 Supports full speed (12Mbit/sec.) and low speed (1.5Mbits/sec.) modes Integrated 5V to 3.3V regulator Used as a USB device transceiver or host transceiver VBUS disconnection indication through VP and VM outputs Two single-ended receivers with hysteresis USB Detection of VBUS via level translator Stable RCV output during SE0 condition Low power operation from VCC Supports 1.65V to 3.6V I/O voltage levels Full industrial operating range -40 to 85 °C Available in small HBCC-16 and TSSOP-16 packages Product Description The CM2400-02/03/04 Universal Serial Bus (USB) transceiver is fully pliant with the USB specification Rev 1.1 and 2.0. It supports a speed of 12Mbits/s (Full Speed Mode). An internal level shifter allows interface to Application Specific ICs (ASICs) and Programmable Logic Devices (PLD's) running at core voltages of 1.65V to 3.6V. The CM2400-02/03/04 features an internal 5V to 3.3V regulator which is used to power the USB transceiver via the USB supply VBUS. The CM2400-04 features a Mode Input pin (MODE) which allows the device to operate in either single or differential input mode. This device is ideal for portable electronic devices such as mobile phones, digital still cameras, PDAs (Personal Digital Assistants) and IAs (Information Appliances). The CM2400-02/03/04 is packaged in a small form-factor 16-lead HBCC or TSSOP package to conserve board space. Applications - - - - Wireless handsets Digital still cameras PDAs (Personal Digital Assistants) IAs (Information Appliances) Simplified Block Schematic Voltage Regulator VCC VREG VPU ENUM OE VMO/FSEO VPO/VO SPND RCV SPEED MODE- VBUS LEVEL TRANSLATOR D+ D- VP VM GND - MODE pin available on CM2400-04 only. © 2004 California Micro Devices Corp. All rights reserved. 08/24/04 430 N. Mc Carthy Blvd., Milpitas, CA 95035-5112 - Tel: 408.263.3214 - Fax: 408.263.7846 - .calmicro. PRELIMINARY CM2400-02/03/04 PACKAGE /...