CM2400-05 Datasheet | CMD

Features - - - - - - - - - - - - plies with USB Specification Rev 1.1 & 2.0 Supports Full Speed Mode (12Mbit/s) Integrated 5V to 3.3V regulator Bi-directional driver input/output pins Two single-ended receivers with hysteresis USB detection of VBUS via level translator Stable RCV output during SE0 condition Low power operation Supports 1.65 to 3.6V I/O voltage levels Full industrial operating range -40 to 85°C Available in tiny HBCC-16 and TQFN-16 packages Lead-free versions available Product Description The CM2400-05 Universal Serial Bus (USB) transceiver is fully pliant with USB specification, revisions 1.1 and 2.0. It supports a speed of 12Mbits/s (Full Speed Mode). An internal level shifter allows interface to Application Specific Integrated Circuits (ASICs) and Programmable Logic Devices (PLDs) running at core voltages of 1.65V to 3.6V. An internal 5V to 3.3V regulator is used to power the CM2400-05 USB transceiver via the USB supply VBUS. VM/VMO and VP/VPO are bi-directional interface pins. In one mode they function as the differential driver input data. In another mode they function as the output of the single ended receivers. This mode is configured by the OE pin. This device is ideal for portable electronic devices such as mobile phones, digital still cameras, PDAs (Personal Digital Assistants) and IAs (Information Appliances). The CM2400-05 is manufactured in small form-factor 16-lead HBCC or TQFN packages to conserve board space and is available with optional lead-free finishing. Applications - - - - - Wireless Handsets Digital Still Cameras PDAs (Personal Digital Assistants) IAs (Information Appliances) Pin and functionally patible with Philips ISP1102 Simplified Block Schematic VCC Voltage Detector ENABLE USB_DET Voltage Regulator VBUS VREG OE SPND VM/VMO- VP/VPO- RCV LEVEL TRANSLATOR ENUM D+ D- - Pins are bi-directional based on OE state: If OE = VCC, then VM/VMO and VP/VPO are configured as outputs. If OE = GND, then VM/VMO and VP/VPO...